
<rss version="2.0">
<channel>
<title>Pocketpctweaks.com</title>
<description>Tweak your PDA</description>
<link>http://www.pocketpctweaks.com/</link>
<copyright>Copyright 2004</copyright>

	
  <item>
  <title>
  Increase Bluetooth Microphone Volume
  </title>
  <description>
  There are many posts and topics about increasing the bluetooth mic volume. As many as there are suggestions, there are also unanswered questions. It has taken me many many days to experiment with different tweaks in my attempt to increase the microphone volume of my bluetooth headset (it was really soft and sounded very "distant"). Finally I found a solution that works for me. Many sites and forums I came across sugggest changing values in "RECEIVE_UPLINK_VOLUME", "EARPHONE_UPLINK_VOLUME", "SPEAKER_UPLINK_VOLUME", "HEADSET_UPLINK_VOLUME" to "CC" and adding new entries like "MicVolume" in "AudioGateway" if it doesnt exist and even changing the bluetooth headset channel from "2" to something higher. It may have worked for some but none of them worked for me. There seems to be much confusion about which controls what. After many tries, I decided to set all values back to the original (I did keep a record of what I changed) and give it one last go and now I am plenty glad I did cos now my bluetooth mic volume is just about as loud as speaking into the device directly.This is the ONE and ONLY value I changed;HKLM\Software\HTC\AUDIOGAIN\HEADSET_UPLINK_VOLUME = 10 (DWORD hexadecimal). (original is "0A". The volume seems to be limited at this level but its good enough for me. I think the "limiter" is preventing it from going any higher)Things I did...Changed - HKLM\Software\HTC\AUDIOGAIN\RECEIVE_UPLINK_VOLUME = CC(now reverted back to its original = 00)Changed - HKLM\Software\HTC\AUDIOGAIN\EARPHONE_UPLINK_VOLUME = CC (now reverted back to its original = 19)Changed - HKLM\Software\HTC\AUDIOGAIN\SPEAKER_UPLINK_VOLUME = CC (now reverted back to its original = 10)Changed - HKLM\Software\HTC\AUDIOGAIN\HEADSET_UPLINK_VOLUME = 10 (Keeping only this setting)Added - HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway\MicVolume(now deleted)Changed - HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway\capability = 74(now reverted back to its original "37")Hope this helps anyone who has been trying to bump up the mic volume. Good luck!
  </description>
  <link>http://www.pocketpctweaks.com/pocketpc_tweaks/increase_bluetooth_mic_vol</link> 
  <pubDate>
  5-December-2007
  </pubDate>
  </item>
  	
  <item>
  <title>
  Install CAB Files to SD Card
  </title>
  <description>
  If you change the following key: HKEY_LOCAL_MACHINE/software/Apps/Microsoft Application installer  'fAskDest' dword value change to 1 (DEC)...It will ask for the installation location each time so you can install on SD card
  </description>
  <link>http://www.pocketpctweaks.com/pocketpc_tweaks/install_cab_files_SDcard</link> 
  <pubDate>
  9-November-2007
  </pubDate>
  </item>
  	
  <item>
  <title>
  Change your Operator Names
  </title>
  <description>
  Step by Step guide to change Your Operator names:Find HKLM/Software/Microsoft/RIL/OperatorNames and Create new string. String name must be your operator codes. string value to any words...
  </description>
  <link>http://www.pocketpctweaks.com/pocketpc_tweaks/change_operator_name</link> 
  <pubDate>
  2-November-2007
  </pubDate>
  </item>
  	
  <item>
  <title>
  Prohibit Backlight going to defaults 
  </title>
  <description>
  If you change the backlight settings they will go back to defaults when powered of.  By changing this key, this will not happen anymore.  HKEY_CURRENT_USER\ControlPanel\Backlight\Locklevel Set LockLevel = 0Then do a soft resetThe time you set for the backlight will remain now after a power off
  </description>
  <link>http://www.pocketpctweaks.com/pocketpc_tweaks/prohibit_backlight_defaults</link> 
  <pubDate>
  18-October-2007
  </pubDate>
  </item>
  	
  <item>
  <title>
  Increase Wireless Connectivity
  </title>
  <description>
  This tweak increases the connectivity from your pda to your wireless router.locate to KEY_LM/Software/Wireless/Drivermake the Value Data 30, ( or more for faster connectivity )
  </description>
  <link>http://www.pocketpctweaks.com/pocketpc_tweaks/increase_wireless_connectivity</link> 
  <pubDate>
  21-August-2007
  </pubDate>
  </item>
  
</channel>
</rss>